Foot Mounted Three Phase Motor

  • Description
  • Reviews (0)

Description

With genuine intentions to enhance the reputation we have developed in this industry arena, we are offering a distinctive collection of Foot Mounted Three Phase Motor.Immensely cherished owing to its reliability, these are highly applauded. Moreover, these could be acquired from us at feasible rates.

Motor confirm to the following IS specifications:

 

  • IS: 325 – Specifications for three phase induction motors.
  • IS: 1231 – Dimensions of three phase foot mounted induction motors.
  • IS: 2223 – Dimensions of flange mounted AC induction motors.
  • IS: 8789 – Values of performance characteristics for three phase inductions motors.


Constructional Features :

 

  • Robust cast iron frames and end covers.
  • Driving end shaft with tapped centre hole.
  • Motor enclosures and terminal box are with IP-54 degree of protection.


Special Features (On Request):

  • Voltage Variation ± 10%, Frequency Variation ± 6%, Ambient temperatures higher than

Constructional Features:

  • Frame : Cast Iron for Motors in 63 to 180 frames with rugged construction.
  • End shields : End shields are with Cast Iron
  • Terminal Box : Position on top box motors in 63 to 180 frame . Terminal box can be rotated in the step of 90 through 360° for desired cable entries direction. Cable gland suitable to 3/4″ to 1″ with BS conduit threadings.
  • Shaft : Material EN8 with threaded center for locking of pulley / gear.
  • Bearings : Deep groove radial ball bearings (Single row) capable of taking axial loads in both the directions at high speeds.
  • Protection : IP-55/44 by means of `V’ ring seals and oil seals to prevent penetration of solid contaminants / moisture into the motor.
  • Momentary Overload : 1.6 times of rated torque for 15 seconds.
  • Insulation class : F’ class with temp rise limited to `B’ class
  • Rotors : Squirrel cage, Aluminum pressure die cast dynamically balanced with half key to maintain low.vibration levels
  • Winding : Wound with class `F’ wire and impregnated with class `F’ varnish
  • Electric supply & variations : 415V ±10%, 50Hz ±5% and combined variations ±10% unless otherwise specified.
  • Duty : Continues (S1)
  • Starting Up : 5 seconds for 2 starts from cold conditions.
  • Service factor : Service factor 1.1 at rated voltage and frequency with class `F’ temp.rise.
  • Ambient Temp : 40°C.

Additional Information:
  • Minimum Order Quantity: 5 Piece(s)
  • Item Code: B3

Reviews

There are no reviews yet.


Be the first to review “Foot Mounted Three Phase Motor”